New 2023 Realistic 300-730 Dumps Test Engine Exam Questions in here
Updated Official licence for 300-730 Certified by 300-730 Dumps PDF
Cisco 300-730 (Implementing Secure Solutions with Virtual Private Networks) certification exam is designed for IT professionals who are interested in validating their skills and knowledge related to implementing secure solutions using Virtual Private Networks (VPNs). Implementing Secure Solutions with Virtual Private Networks certification exam is ideal for professionals who are responsible for implementing and managing VPNs in their organization's network infrastructure.
One of the key benefits of obtaining the Cisco 300-730 certification is that it validates a candidate's ability to implement secure VPN solutions for organizations of all sizes. This is particularly important in today's rapidly evolving threat landscape, where cyberattacks are becoming increasingly sophisticated and frequent. By passing 300-730 exam, candidates can demonstrate their ability to help protect their organizations against these threats.
Cisco 300-730 exam is a certification test that measures the ability of IT professionals to implement secure solutions using virtual private networks (VPNs). 300-730 exam is designed for individuals who have a solid understanding of basic networking concepts and are looking to further their knowledge in VPNs. 300-730 exam focuses on various security protocols, technologies, and solutions that are used to secure VPNs, including encryption, authentication, and access control.
NEW QUESTION # 105
A second set of traffic selectors is negotiated between two peers using IKEv2. Which IKEv2 packet will contain details of the exchange?
- A. IKEv2 IKE_SA_INIT
- B. IKEv2 CREATE_CHILD_SA
- C. IKEv2 IKE_AUTH
- D. IKEv2 INFORMATIONAL
Answer: B
Explanation:
The IKEv2 CREATE_CHILD_SA packet is used to establish a new security association (SA) between two peers. This packet contains the details of the exchange, including the traffic selectors, the cryptographic algorithms and keys to be used, and any other relevant information
NEW QUESTION # 106
Refer to the exhibit.
An engineer is building an IKEv1 tunnel to a peer Cisco ASA, but the tunnel is failing. Based on the configuration in the exhibit, which action must be taken to allow the VPN tunnel to come up?
- A. Enable IKEv1 on the outside interface.
- B. Change the IKEv1 policy number to be at least 256.
- C. Change the transform set mode to transport.
- D. Add a route for the 10.7.7.0/24 network to egress the outside interface.
Answer: A
NEW QUESTION # 107
A Cisco AnyConnect client establishes a SSL VPN connection with an ASA at the corporate office. An engineer must ensure that the client computer meets the enterprise security policy. Which feature can update the client to meet an enterprise security policy?
- A. Cisco Secure Desktop
- B. Advanced Endpoint Assessment
- C. Basic Host Scan
- D. Endpoint Assessment
Answer: B
NEW QUESTION # 108
Which feature allows the ASA to handle nonstandard applications and web resources so that they display correctly over a clientless SSL VPN connection?
- A. plug-ins
- B. Smart Tunnel
- C. WebType ACL
- D. single sign-on
Answer: B
Explanation:
Section: Remote access VPNs
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/ asa_90_cli_config/vpn_clientless_ssl.html#29951
NEW QUESTION # 109 
Refer to the exhibit. A site-to-site tunnel between two sites is not coming up. Based on the debugs, what is the cause of this issue?
- A. UDP 4500 traffic from the peer does not reach the router.
- B. A certificate fragmentation issue occurs between both sides.
- C. An authentication failure occurs on the router.
- D. An authentication failure occurs on the remote peer.
Answer: A
Explanation:
Section: Troubleshooting using ASDM and CLI
NEW QUESTION # 110
Which two commands help determine why the NHRP registration process is not being completed even after the IPsec tunnel is up? (Choose two.)
- A. show crypto isakmp sa
- B. show crypto ipsec sa
- C. show dmvpn detail
- D. show ip traffic
- E. show ip nhrp traffic
Answer: A,E
NEW QUESTION # 111
Which technology is used to send multicast traffic over a site-to-site VPN?
- A. GRE over IPsec on FTD
- B. IPsec tunnel on FTD
- C. GRE over IPsec on IOS router
- D. GRE tunnel on ASA
Answer: C
Explanation:
https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/216276-configure-route-based-site-to-site-vpn-t.html#anc6
NEW QUESTION # 112
Which two features provide headend resiliency for Cisco AnyConnect clients? (Choose two.)
- A. AnyConnect Network Access Manager
- B. AnyConnect Auto Reconnect
- C. AnyConnect Always On
- D. ASA failover
- E. AnyConnect Backup Servers
Answer: D,E
Explanation:
According to the Implementing Secure Solutions with Virtual Private Networks (SVPN) documents and learning resources available at cisco.com, the two features that provide headend resiliency for Cisco AnyConnect clients are:
AnyConnect Backup Servers: This feature allows the AnyConnect client to automatically connect to a backup server in case the primary server is unreachable or fails. The backup server list is configured on the ASA or IOS headend and pushed to the client during the VPN connection establishment. The client can also manually select a backup server from the list if needed. This feature enhances the availability and reliability of the VPN service for the clients12.
ASA failover: This feature enables two identical ASAs to be paired together as an active/standby or active/active pair. The ASAs synchronize their configuration and state information and monitor each other's health. If the active ASA fails or becomes unreachable, the standby ASA takes over the traffic and VPN sessions without any disruption for the clients. This feature provides high availability and redundancy for the VPN headend34.
1: AnyConnect Backup Servers 2: Redundancy options for IOS Headend for AnyConnect Clients 3: ASA Failover 4: AnyConnect Implementation and Performance/Scaling Reference for COVID-19 Preparation
NEW QUESTION # 113
An engineer is using DMVPN to provide secure connectivity between a data center and remote sites. Which two routing protocols should be used between the routers? (Choose two.)
- A. EIGRP
- B. OSPF
- C. RIPv2
- D. BGP
- E. IS-IS
Answer: A,D
NEW QUESTION # 114
Refer to the exhibit.
An engineer has configured a spoke to connect to a FlexVPN hub. The tunnel is up, but pings fail when the engineer attempts to reach host 192.168.200.10 behind the spoke, and traffic is sourced from host 192.168.100.3, which is behind the FlexVPN server. Based on packet captures, the engineer discovers that host 192.168.200.10 receives the icmp echo and sends an icmp reply that makes it to the inside interface of the spoke. Based on the output in the exhibit captured on the spoke by the engineer, which action resolves this issue?
- A. Add the aaa authorization group cert list default default command to the hub ikev2 profile.
- B. Add the aaa authorization group cert list default default command to the spoke ikev2 profile.
- C. Add the route set remote ipv4 192.168.200.0 255.255.255.0 command to the hub authorization policy.
- D. Add the route set remote ipv4 192.168.100.0 255.255.255.0 command to the spoke authorization policy.
Answer: D
Explanation:
The problem is that the spoke does not have a route to the host 192.168.100.3, which is behind the FlexVPN server. The spoke only has a default route to the tunnel interface, which points to the FlexVPN hub. Therefore, when the spoke receives the icmp reply from host 192.168.200.10, it does not know how to forward it to host 192.168.100.3.
One way to solve this problem is to add a route to the host 192.168.100.3 on the spoke using the route set remote ipv4 command in the authorization policy on the spoke. This command allows the FlexVPN server to push a route to the FlexVPN client during IKEv2 authorization. For example:
crypto ikev2 authorization policy default route set remote ipv4 192.168.100.0 255.255.255.0 This way, the spoke will have a more specific route to host 192.168.100.3 via the tunnel interface, and will be able to forward the icmp reply correctly.
NEW QUESTION # 115
Which technology works with IPsec stateful failover?
- A. VRRP
- B. GLBR
- C. GRE
- D. HSRP
Answer: D
Explanation:
Section: Secure Communications Architectures
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios/12_2/12_2y/12_2yx11/feature/guide/ ft_vpnha.html#wp1122512
NEW QUESTION # 116
Refer to the exhibit.
Which VPN technology is used in the exhibit?
- A. DVTI
- B. GRE
- C. VTI
- D. DMVPN
Answer: C
NEW QUESTION # 117 
Refer to the exhibit. An SSL client is connecting to an ASA headend. The session fails with the message
"Connection attempt has timed out. Please verify Internet connectivity." Based on how the packet is processed, which phase is causing the failure?
- A. phase 5: NAT
- B. phase 4: ACCESS-LIST
- C. phase 3: UN-NAT
- D. phase 9: rpf-check
Answer: C
Explanation:
Section: Troubleshooting using ASDM and CLI
NEW QUESTION # 118
A Cisco ASA is configured in active/standby mode. What is needed to ensure that Cisco AnyConnect users can connect after a failover event?
- A. The vpnsession-db must be cleared manually.
- B. AnyConnect images must be uploaded to both failover ASA devices.
- C. Configure a backup server in the XML profile.
- D. AnyConnect client must point to the standby IP address.
Answer: B
Explanation:
Section: Secure Communications Architectures
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/asa_90_cli_config/ ha_active_standby.html
NEW QUESTION # 119
A network engineer is implementing a FlexVPN tunnel between two Cisco IOS routers. The FlexVPN tunnels will terminate on encrypted traffic on an interface configured with an IP MTU of 1500, and the company has a security policy to drop fragmented traffic coming into or leaving the network. The tunnel will be used to transfer TFTP data between users and internal servers. When the TFTP traffic is not traversing a VPN, it can have a maximum IP packet size of 1500. Assuming the encrypted payload will add 90 bytes, which configuration allows TFTP traffic to traverse the FlexVPN tunnel without being dropped?
- A. Set the tunnel IP MTU to 1400.
- B. Set the tunnel tcp adjust-mss to 1460.
- C. Set the tunnel IP MTU to 1500.
- D. Set the tunnel tcp adjust-mss to 1360.
Answer: D
NEW QUESTION # 120
Which technology works with IPsec stateful failover?
- A. VRRP
- B. GLBR
- C. GRE
- D. HSRP
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/12_2/12_2y/12_2yx11/feature/guide/ ft_vpnha.html#wp1122512
NEW QUESTION # 121
An administrator must guarantee that remote access users are able to reach printers on their local LAN after a VPN session is established to the headquarters. All other traffic should be sent over the tunnel. Which split-tunnel policy reduces the configuration on the ASA headend?
- A. include specified
- B. exclude specified
- C. tunnel specified
- D. dynamic exclude
Answer: B
Explanation:
You could in theory "tunnel specified" and list every subnet aside from the local one in the split tunnel list, but that is cumbersome and clearly not the best answer from the "reduce the configuration" requirement. Exclude only the local subnet and continue with your day.
NEW QUESTION # 122
Cisco AnyConnect clients need to transfer large files over the VPN sessions. Which protocol provides the best throughput?
- A. SSL/TLS
- B. DTLS
- C. L2TP
- D. IPsec IKEv1
Answer: B
NEW QUESTION # 123
Refer to the exhibit.
A site-to-site tunnel between two sites is not coming up. Based on the debugs, what is the cause of this issue?
- A. UDP 4500 traffic from the peer does not reach the router.
- B. A certificate fragmentation issue occurs between both sides.
- C. An authentication failure occurs on the router.
- D. An authentication failure occurs on the remote peer.
Answer: A
NEW QUESTION # 124
Which feature allows the ASA to handle nonstandard applications and web resources so that they display correctly over a clientless SSL VPN connection?
- A. plug-ins
- B. Smart Tunnel
- C. WebType ACL
- D. single sign-on
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/asa_90_cli_config/ vpn_clientless_ssl.html#29951
NEW QUESTION # 125
In order to enable FlexVPN to use a AAA attribute list, which two tasks must be performed? (Choose two.)
- A. Assign the list to an authorization policy.
- B. Define the RADIUS server.
- C. Set the maximum segment size.
- D. Define the AAA server.
- E. Verify that clients are using the correct authorization policy.
Answer: A,E
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/flexvpn/116032-flexvpn-aaa-config-example-00.html
NEW QUESTION # 126
Drag and drop the correct commands from the night onto the blanks within the code on the left to implement a design that allow for dynamic spoke-to-spoke communication. Not all comments are used.
Answer:
Explanation:
NEW QUESTION # 127
Which remote access VPN technology requires the use of the IPsec-proposal configuration option?
- A. clientless SSLVPN
- B. IKEv1-based VPN
- C. IKEv2-based VPN
- D. SSLVPN Full Tunnel
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/asa/asa96/configuration/vpn/asa-96-vpn-config/vpn-remote-access.html The IPsec-proposal configuration option is used to specify the encryption, integrity, and authentication algorithms that will be used in the IPsec protocol. In the case of IKEv2-based VPN, this option is used to configure the IPsec security associations (SA) that will be established between the VPN client and the VPN gateway during IKEv2 negotiation. IKEv2 uses IPsec as its underlying encryption and authentication protocol, so the IPsec-proposal configuration is essential to establishing a secure VPN tunnel using IKEv2
NEW QUESTION # 128
......
Grab latest Cisco 300-730 Dumps as PDF Updated: https://exams4sure.briandumpsprep.com/300-730-prep-exam-braindumps.html
