[May 15, 2024] Genuine 300-730 Exam Dumps New 2024 Cisco Pratice Exam
New 2024 Realistic 300-730 Dumps Test Engine Exam Questions in here
Cisco 300-730 certification exam is an essential certification for network security professionals who specialize in VPN solutions using Cisco technologies. Implementing Secure Solutions with Virtual Private Networks certification validates the individual's knowledge and skills in implementing secure VPN solutions. 300-730 exam covers various topics related to VPN technologies, secure communications, access control, and security policies. Passing the exam requires thorough preparation and experience in implementing VPN solutions.
NEW QUESTION # 69
Which feature allows the ASA to handle nonstandard applications and web resources so that they display correctly over a clientless SSL VPN connection?
- A. WebType ACL
- B. plug-ins
- C. single sign-on
- D. Smart Tunnel
Answer: B
Explanation:
Plug-ins are extensions to the Clientless SSL VPN feature that enable the ASA to handle non-standard applications and Web resources so that they display correctly over a Clientless SSL VPN connection. Plug-ins are software components that the ASA downloads to the remote user's browser. The plug-ins provide support for applications and protocols that are not natively supported by Clientless SSL VPN, such as Java, ActiveX, SSH, Telnet, and RDP. Plug-ins can also provide enhanced functionality and security for Web applications, such as Outlook Web Access and Lotus iNotes.
You can read more about plug-ins and how to configure them in the document [ASDM Book 3: Cisco ASA Series VPN ASDM Configuration Guide, 7.7] 1.
NEW QUESTION # 70
An engineer is creating an URL object on Cisco FMC. How must it be configured so that the object will match for HTTPS traffic in an access control policy?
- A. Use the FQDN including the subdomain for the website.
- B. Define the path to the individual webpage that uses HTTPS.
- C. Specify the protocol to match (HTTP or HTTPS).
- D. Use the subject common name from the website certificate.
Answer: A
Explanation:
Use the FQDN including the subdomain for the website. According to the Firepower Management Center Configuration Guide, Version 6.61, when you create a URL object, you must use the fully qualified domain name (FQDN) of the website, including any subdomains, and omit the protocol prefix (HTTP or HTTPS). For example, to match www.example.com, you must enter www.example.com as the URL object value, not http://www.example.com or https://www.example.com. The system automatically matches both HTTP and HTTPS traffic for the same FQDN. Specifying the protocol to match (HTTP or HTTPS) is not required and will result in an invalid URL object. Using the subject common name from the website certificate or defining the path to the individual webpage that uses HTTPS are not supported options for URL objects.
NEW QUESTION # 71
Which IKE identity does an IOS/IOS-XE headend expect to receive if an IPsec Cisco AnyConnect client uses default settings?
- A. *$DfltlkeldentityS*
- B. *$AnyConnectClient$*
- C. *$RemoteAccessVpnClient$*
- D. *$SecureMobilityClient$*
Answer: B
NEW QUESTION # 72
Refer to the exhibit.
Based on the configuration output, what is the VPN technology?
- A. DMVPN
- B. L2VPN
- C. site-to-site
- D. multicast VPN
Answer: B
NEW QUESTION # 73
An engineer is troubleshooting a new DMVPN setup on a Cisco IOS router. After the show crypto isakmp sa command is issued, a response is returned of "MM_NO_STATE." Why does this failure occur?
- A. ESP traffic is being dropped.
- B. The Phase 1 policy does not match on both devices.
- C. Tunnel protection is not applied to the DMVPN tunnel.
- D. The ISAKMP policy priority values are invalid.
Answer: A
Explanation:
Section: Troubleshooting using ASDM and CLI
NEW QUESTION # 74
Which command automatically initiates a smart tunnel when a user logs in to the WebVPN portal page?
- A. auto-upgrade
- B. auto-start
- C. auto-connect
- D. auto-run
Answer: B
NEW QUESTION # 75
Where is split tunneling defined for IKEv2 remote access clients on a Cisco router?
- A. webvpn context
- B. Group Policy
- C. IKEv2 authorization policy
- D. virtual template
Answer: B
Explanation:
Section: Secure Communications Architectures
NEW QUESTION # 76
Over the weekend, an administrator upgraded the Cisco ASA image on the firewalls and noticed that users cannot connect to the headquarters site using Cisco AnyConnect. What is the solution for this issue?
- A. Upgrade the Cisco AnyConnect Start Before Logon module to be compatible with the Cisco ASA software image.
- B. Upgrade the Cisco AnyConnect client driver to be compatible with the Cisco ASA software image.
- C. Upgrade the Cisco AnyConnect Network Access module to be compatible with the Cisco ASA software image.
- D. Upgrade the Cisco AnyConnect client version to be compatible with the Cisco ASA software image.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/asa/compatibility/asa-vpn-compatibility.html#Cisco_Reference.dita_60cec583-01b8-4cb2-a6e3-2fe87a6b0f82
NEW QUESTION # 77
Which method dynamically installs the network routes for remote tunnel endpoints?
- A. policy-based routing
- B. reverse route injection
- C. route filtering
- D. CEF
Answer: B
Explanation:
Reverse route injection (RRI) is a method that dynamically installs the network routes for remote tunnel endpoints. The RRI feature allows the router to automatically learn the routes for the remote networks and automatically install these routes into the routing table. This eliminates the need for the administrator to manually configure and maintain the routes for the remote networks. This feature is commonly used in VPN environments, where the router at the VPN endpoint needs to learn the routes for the remote networks behind the other VPN endpoint. The other options such as policy-based routing, CEF, and route filtering are not used to dynamically install the network routes for remote tunnel endpoints Reference:
NEW QUESTION # 78
Refer to the exhibit.
Client 1 cannot communicate with client 2. Both clients are using Cisco AnyConnect and have established a successful SSL VPN connection to the hub ASA.
Which command on the ASA is missing?
- A. dns-server value 10.1.1.2
- B. same-security-traffic permit inter-interface
- C. same-security-traffic permit intra-interface
- D. dns-server value 10.1.1.3
Answer: C
Explanation:
The same-security-traffic intra-interface command lets traffic enter and exit the same interface, which is normally not allowed. This feature might be useful for VPN traffic that enters an interface, but is then routed out the same interface. The VPN traffic might be unencrypted in this case, or it might be reencrypted for another VPN connection. For example, if you have a hub and spoke VPN network, where the security appliance is the hub, and remote VPN networks are spokes, for one spoke to communicate with another spoke, traffic must go into the security appliance and then out again to the other spoke.
NEW QUESTION # 79
Which command is used to troubleshoot an IPv6 FlexVPN spoke-to-hub connectivity failure?
- A. show crypto gkm
- B. show crypto ikev2 sa
- C. show crypto identity
- D. show crypto isakmp sa
Answer: B
Explanation:
Section: Troubleshooting using ASDM and CLI
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/flexvpn/116413-configure-flexvpn-00.pdf
NEW QUESTION # 80
Refer to the exhibit.
Which type of mismatch is causing the problem with the IPsec VPN tunnel?
- A. Phase 1 policy
- B. preshared key
- C. transform set
- D. crypto access list
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/5409- ipsec-debug-00.html#ike
NEW QUESTION # 81
A network engineer must design a clientless VPN solution for a company. VPN users must be able to access several internal web servers. When reachability to those web servers was tested, it was found that one website is not being rewritten correctly by the ASA.
What is a potential solution for this issue while still allowing it to be a clientless VPN setup?
- A. Set up Cisco AnyConnect with a split tunnel that has the IP address of the web server.
- B. Set up a WebACL to permit the IP address of the web server.
- C. Set up a NAT rule that translates the ASA public address to the web server private address on port 80.
- D. Set up a smart tunnel with the IP address of the web server.
Answer: D
NEW QUESTION # 82
Refer to the exhibit.
Based on the exhibit, why are users unable to access CCNP Webserver bookmark?
- A. The URL is being blocked by a WebACL.
- B. The bookmark has been disabled.
- C. The user cannot access the URL.
- D. The ASA cannot resolve the URL.
Answer: D
Explanation:
https://community.cisco.com/t5/network-security/missing-ssl-vpn-bookmarks/td-p/1597023
NEW QUESTION # 83
A network engineer must expand a company's Cisco AnyConnect solution. Currently, a Cisco ASA is set up in North America and another will be installed in Europe with a different IP address. Users should connect to the ASA that has the lowest Round Trip Time from their network location as measured by the AnyConnect client. Which solution must be implemented to meet this requirement?
- A. IP SLA
- B. Optimal Gateway Selection
- C. DNS Load Balancing
- D. VPN Load Balancing
Answer: B
Explanation:
Optimal Gateway Selection (OGS). OGS is a feature that can be used in order to determine which gateway has the lowest Round Trip Time (RTT) and connect to that gateway. One can use the OGS feature in order to minimize latency for Internet traffic without user intervention. With OGS, Cisco AnyConnect Secure Mobility Client (AnyConnect) identifies and selects which secure gateway is best for connection or reconnection. OGS begins upon first connection or upon a reconnection at least four hours after the previous disconnection.
NEW QUESTION # 84
Refer to the exhibit.
A network engineer is reconfiguring clientless SSLVPN during a maintenance window, and after testing the new configuration, is unable to establish the connection. What must be done to remediate this problem?
- A. Enable client services on the outside interface.
- B. Enable DTLS under the group policy.
- C. Enable clientless protocol under the group policy.
- D. Enable auto sign-on for the user's IP address.
Answer: C
NEW QUESTION # 85
An organization wants to implement a site-to-site VPN solution that must be able to support 350 sites with direct communications between all sites, fully encrypt the packet header and payload, and support propagation of routing information over IPsec. Which solution meets these requirements?
- A. IPsec full mesh
- B. DMVPN
- C. FlexVPN
- D. GETVPN
Answer: C
Explanation:
https://networklessons.com/cisco/ccie-enterprise-infrastructure/flexvpn-ikev2-routing
NEW QUESTION # 86 
Refer to the exhibit. Based on the debug output, which type of mismatch is preventing the VPN from coming up?
- A. PFS
- B. interesting traffic
- C. lifetime
- D. preshared key
Answer: C
Explanation:
Section: Troubleshooting using ASDM and CLI
Explanation:
If the responder's policy does not allow it to accept any part of the proposed Traffic Selectors, it responds with a TS_UNACCEPTABLE Notify message.
NEW QUESTION # 87
......
Main Requirements
Cisco 300-730 is from the professional-level certification track. It is designed for the network security engineers and other professionals who belong to the same field.
Grab latest Amazon 300-730 Dumps as PDF Updated: https://exams4sure.briandumpsprep.com/300-730-prep-exam-braindumps.html
