Try 300-715 Exam Valid Dumps with Instant Download Free Updates
300-715 Dumps First Attempt Guaranteed Success
To prepare for the Cisco 300-715 exam, you need to have a solid understanding of network security concepts, Cisco ISE architecture, and its components. You also need to have experience in implementing and configuring Cisco ISE solutions in a real-world environment. Cisco offers various training courses, study materials, and practice exams to help you prepare for the exam. You can also join online forums or study groups to interact with other candidates and gain insights into the exam.
NEW QUESTION # 17
A user changes the status of a device to stolen in the My Devices Portal of Cisco ISE. The device was originally onboarded in the BYOD wireless Portal without a certificate. The device is found later, but the user cannot re-onboard the device because Cisco ISE assigned the device to the Blocklist endpoint identity group. What must the user do in the My Devices Portal to resolve this issue?
- A. Change the BYOD registration attribute of the device to None.
- B. Delete the device, and then re-add the device.
- C. Change the device state from Stolen to Not Registered.
- D. Manually remove the device from the Blocklist endpoint identity group.
Answer: C
NEW QUESTION # 18
A Cisco ISE server sends a CoA to a NAD after a user logs in successfully using CWA Which action does the CoA perform?
- A. It applies the downloadable ACL provided in the CoA
- B. It triggers the NAD to reauthenticate the client
- C. It applies new permissions provided in the CoA to the client session.
- D. It terminates the client session
Answer: A
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/115732-central-web-auth-00.html
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/113362-config-web-auth-ise-00.html
NEW QUESTION # 19
A network administrator is configuring authorization policies on Cisco ISE There is a requirement to use AD group assignments to control access to network resources After a recent power failure and Cisco ISE rebooting itself, the AD group assignments no longer work What is the cause of this issue?
- A. The AD join point is no longer connected.
- B. The certificate checks are not being conducted.
- C. The AD DNS response is slow.
- D. The network devices ports are shut down.
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-3/ise_active_directory_integration/b_ISE_AD_integration_
NEW QUESTION # 20
Which Cisco ISE service allows an engineer to check the compliance of endpoints before connecting to the network?
- A. personas
- B. nexpose
- C. qualys
- D. posture
Answer: D
Explanation:
Section: Endpoint Compliance
NEW QUESTION # 21
An organization wants to implement 802.1X and is debating whether to use PEAP-MSCHAPv2 or PEAP-EAP-TLS for authentication. Drag the characteristics on the left to the corresponding protocol on the right.
Answer:
Explanation:
NEW QUESTION # 22
Which two actions occur when a Cisco ISE server device administrator logs in to a device? (Choose two)
- A. The device queries the external identity store
- B. The device queries the Cisco ISE authorization server
- C. The Cisco ISE server queries the internal identity store
- D. The device queries the internal identity store
- E. The Cisco ISE server queries the external identity store.
Answer: B,E
NEW QUESTION # 23
An administrator needs to allow guest devices to connect to a private network without requiring usernames and passwords. Which two features must be configured to allow for this? (Choose two.)
- A. self-registered guest portal
- B. local WebAuth
- C. device registration WebAuth
- D. central WebAuth
- E. hotspot guest portal
Answer: C,E
NEW QUESTION # 24
Which two endpoint compliance statuses are possible? (Choose two.)
- A. valid
- B. invalid
- C. known
- D. unknown
- E. compliant
Answer: D,E
NEW QUESTION # 25
Select and Place
Answer:
Explanation:
NEW QUESTION # 26
An engineer is working with a distributed deployment of Cisco ISE and needs to configure various network probes to collect a set of attributes from the endpoints on the network. Which node should be used to accomplish this task?
- A. primary PAN
- B. MnT
- C. pxGrid
- D. PSN
Answer: D
NEW QUESTION # 27
An engineer is creating a new authorization policy to give the endpoints access to VLAN 310 upon successful authentication The administrator tests the 802.1X authentication for the endpoint and sees that it is authenticating successfully What must be done to ensure that the endpoint is placed into the correct VLAN?
- A. Configure the switchport access vlan 310 command on the switch port
- B. Ensure that the endpoint is using The correct policy set
- C. Ensure that the security group is not preventing the endpoint from being in VLAN 310
- D. Add VLAN 310 in the common tasks of the authorization profile
Answer: D
NEW QUESTION # 28
Which two methods should a sponsor select to create bulk guest accounts from the sponsor portal? (Choose two )
- A. Monthly
- B. Random
- C. Daily
- D. Imported
- E. Known
Answer: B,D
NEW QUESTION # 29
Drag the descriptions on the left onto the components of 802.1X on the right.
Answer:
Explanation:
NEW QUESTION # 30
Which two probes must be enabled for the ARP cache to function in the Cisco ISE profile service so that a user can reliably bind the IP address and MAC addresses of endpoints? (Choose two.)
- A. RADIUS
- B. SNMP
- C. DHCP
- D. HTTP
- E. NetFlow
Answer: A,C
Explanation:
Explanation
Cisco ISE implements an ARP cache in the profiling service, so that you can reliably map the IP addresses and the MAC addresses of endpoints. For the ARP cache to function, you must enable either the DHCP probe or the RADIUS probe. The DHCP and RADIUS probes carry the IP addresses and the MAC addresses of endpoints in the payload data. The dhcp-requested address attribute in the DHCP probe and the Framed-IP-address attribute in the RADIUS probe carry the IP addresses of endpoints, along with their MAC addresses, which can be mapped and stored in the ARP cache.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide
NEW QUESTION # 31
Which two default endpoint identity groups does Cisco ISE create? (Choose two )
- A. block list
- B. unknown
- C. endpoint
- D. allow list
- E. profiled
Answer: B,E
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide Default Endpoint Identity Groups Created for EndpointsCisco ISE creates the following five endpoint identity groups by default: Blacklist, GuestEndpoints, Profiled, RegisteredDevices, and Unknown. In addition, it creates two more identity groups, such as Cisco-IP-Phone and Workstation, which are associated to the Profiled (parent) identity group. A parent group is the default identity group that exists in the system.
Cisco ISE creates the following endpoint identity groups:
* Blacklist-This endpoint identity group includes endpoints that are statically assigned to this group in Cisco ISE and endpoints that are block listed in the device registration portal. An authorization profile can be defined in Cisco ISE to permit, or deny network access to endpoints in this group.
* GuestEndpoints-This endpoint identity group includes endpoints that are used by guest users.
* Profiled-This endpoint identity group includes endpoints that match endpoint profiling policies except Cisco IP phones and workstations in Cisco ISE.
* RegisteredDevices-This endpoint identity group includes endpoints, which are registered devices that are added by an employee through the devices registration portal. The profiling service continues to profile these devices normally when they are assigned to this group. Endpoints are statically assigned to this group in Cisco ISE, and the profiling service cannot reassign them to any other identity group.
These devices will appear like any other endpoint in the endpoints list. You can edit, delete, and block these devices that you added through the device registration portal from the endpoints list in the Endpoints page in Cisco ISE. Devices that you have blocked in the device registration portal are assigned to the Blacklist endpoint identity group, and an authorization profile that exists in Cisco ISE
* redirects blocked devices to a URL, which displays "Unauthorised Network Access", a default portal page to the blocked devices.
* Unknown-This endpoint identity group includes endpoints that do not match any profile in Cisco ISE.
In addition to the above system created endpoint identity groups, Cisco ISE creates the following endpoint identity groups, which are associated to the Profiled identity group:
* Cisco-IP-Phone-An identity group that contains all the profiled Cisco IP phones on your network.
* Workstation-An identity group that contains all the profiled workstations on your network.
NEW QUESTION # 32
What are two components of the posture requirement when configuring Cisco ISE posture? (Choose two)
- A. conditions
- B. updates
- C. Client Provisioning portal
- D. remediation actions
- E. access policy
Answer: A,D
NEW QUESTION # 33
Refer to the exhibit.
An organization recently implemented network device administration using Cisco ISE. Upon testing the ability to access all of the required devices, a user in the Cisco ISE group IT Admins is attempting to login to a device in their organization's finance department but is unable to. What is the problem?
- A. The authorization policy doesn't correctly grant them access to the finance devices.
- B. The IT training rule is taking precedence over the IT Admins rule.
- C. The authorization conditions wrongly allow IT Admins group no access to finance devices.
- D. The finance location is not a condition in the policy set.
Answer: A
NEW QUESTION # 34
An organization wants to implement 802.1X and is debating whether to use PEAP-MSCHAPv2 or PEAP-EAP-TLS for authentication. Drag the characteristics on the left to the corresponding protocol on the right.
Answer:
Explanation:
NEW QUESTION # 35
The IT manager wants to provide different levels of access to network devices when users authenticate using TACACS+. The company needs specific commands to be allowed based on the Active Directory group membership of the different roles within the IT department. The solution must minimize the number of objects created in Cisco ISE. What must be created to accomplish this task?
- A. one shell profile and multiple command sets
- B. one shell profile and one command set
- C. multiple shell profiles and multiple command sets
- D. multiple shell profiles and one command set
Answer: A
NEW QUESTION # 36
What must be configured on the Cisco ISE authentication policy for unknown MAC addresses/identities for successful authentication?
- A. drop
- B. continue
- C. pass
- D. reject
Answer: B
Explanation:
https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_man_id_stores.html
NEW QUESTION # 37
A network administrator is configuring a secondary cisco ISE node from the backup configuration of the primary cisco ISE node to create a high availability pair The Cisco ISE CA certificates and keys must be manually backed up from the primary Cisco ISE and copied into the secondary Cisco ISE Which command most be issued for this to work?
- A. application configure Ise
- B. certificate configure Ise
- C. copy certificate Ise
- D. Import certificate Ise
Answer: C
NEW QUESTION # 38
......
100% Guarantee Download 300-715 Exam Dumps PDF Q&A: https://exams4sure.briandumpsprep.com/300-715-prep-exam-braindumps.html
