Oct-2025 New Version 300-635 Certificate & Helpful Exam Dumps is Online
300-635 Free Certification Exam Material with 76 Q&As
Holding a Cisco certification, such as the 300-635 Automating Cisco Data Center Solutions (DCAUTO) certification, can lead to numerous career opportunities and professional advancement. It can help candidates stand out in a competitive job market and increase their earning potential. Additionally, it can enhance their credibility with employers and clients, demonstrating their commitment to ongoing learning and professional development.
NEW QUESTION # 40
Which action allows Docker daemon persistence during switchover on the Cisco Nexus 9500 Series Switches running Cisco NX-OS?
- A. The system takes automatic action
- B. Copy the dockerpart file manually to the standby supervisor before performing the switchover.
- C. Change the Docker configuration to include the live restore option.
- D. Copy the dockerpart file manually to the standby supervisor after performing the switchover
Answer: C
Explanation:
To ensure Docker daemon persistence during a switchover on Cisco Nexus 9500 Series Switches running Cisco NX-OS, the Docker configuration must be changed to include the live restore option. This option allows running containers to continue operating during the daemon downtime, which is particularly useful during a switchover. References: Cisco Nexus 9500 Series documentation and Docker official documentation.
NEW QUESTION # 41
Refer to the exhibit:
Refer to the exhibit. Which configuration change command must be run on the Cisco NX-OS device to make this command work?
- A. feature bash-shell
- B. service bash-shell
- C. enable bash-shell
- D. bash-shell enable
Answer: A
NEW QUESTION # 42
Refer to the exhibit:
Refer to the exhibit, which two actions does this Python code perform with the Cisco ACI? (Choose two.) It creates a subnet "DevNet_Subnet" inside VRF "DevNet_VRF" located in ACI tenant "DevNet_Tenant" and sets the scope to "private"
- A. It creates an EPG "DevNet_EPG" inside AppProfile "DevNet_App" located in ACI tenant "DevNet_Tenant" and link the EPG with BridgeDomain "DevNet_BD"
- B. It creates a subnet "DevNet_Subnet" inside AppProfile "DevNet_App" located in ACI tenant "DevNet_Tenant" and sets the network address to "10.10.10 1/24"
- C. It creates an EPG "DevNet_EPG" inside VRF "DevNet_VRF" located in ACI tenant "DevNet_Tenant" and link the EPG with BridgeDomain "DevNet BD"
- D. It creates a subnet "DevNet_Subnet" inside VRF "DevNet_VRF" located in ACI tenant "DevNet_Tenant" and sets the network address to "10.10 10.1/24".
Answer: A,D
NEW QUESTION # 43
What is the network bootstrap program used by Cisco NX-OS iPXE?
- A. NETBOOT
- B. Mini-OS
- C. iPXE-POAP
- D. NX-OS iPXE
Answer: A
NEW QUESTION # 44
Refer to the exhibit.
Where and how often does the subscription stream data for Ethernet port 1/1?
- A. to four different destinations every 10000 microseconds
- B. to four different destinations every 10 seconds
- C. to four different destinations every 10000 seconds
- D. to four different destinations every 100 milliseconds
Answer: B
NEW QUESTION # 45
What are two capabilities of the DCNM REST API? (Choose two.)
- A. uses bearer key authorization
- B. uses basic authentication without encoding for username and password
- C. is separated into Classic LAN, LAN Fabric, Media Controller, and SAN Management categories.
- D. uses the dcnm-token header for requests authentication after initial basic authentication
- E. supports HTTP until release 11.0
Answer: C,D
NEW QUESTION # 46
Using the NX-API CLI JSON-RPC interface, which two Python data structure and requests call create an SVI?
(Choose two.)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
- E. Option E
Answer: A,D
NEW QUESTION # 47
How is an ACI class name composed?
- A. Method
- B. Package:ClassName
- C. MitName: Method
- D. ClassName: Method
Answer: B
NEW QUESTION # 48
Using the NX-API CLI JSON-RPC interface, which two Python data structure and requests call create an SVI? (Choose two.)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: B,C
NEW QUESTION # 49
During the process of starting a Python network telemetry collector, which command starts the Cisco bigmuddy-network-telemetry-collector from GitHub?
- A. telemetry_receiver.py --ip-address <addr> -port <port>
- B. streaming telemetry
- C. telemetry_receiver.py --destination <port> -uri <url>
- D. model driven telemetry
Answer: A
Explanation:
The command telemetry_receiver.py --ip-address <addr> -port <port> is used to start a Python network telemetry collector. This command specifies the IP address and port where the telemetry receiver will listen for incoming telemetry data from network devices
NEW QUESTION # 50
Which NX-API request queries the MAC address table?
- A. Option
- B. Option
- C. Option
- D. Option
Answer: B
NEW QUESTION # 51
What are two capabilities of the DCNM REST API? (Choose two.)
- A. uses bearer key authorization
- B. uses basic authentication without encoding for username and password
- C. supports HTTP until release 11.0(1)
- D. uses the dcnm-token header for requests authentication after initial basic authentication
- E. is separated into Classic LAN, LAN Fabric, Media Controller, and SAN Management categories
Answer: D,E
Explanation:
Section: Data Center Compute
Explanation
NEW QUESTION # 52
What happens when the TFTP server is not available?
- A. TFTP server needs to be restarted
- B. Phones can't download configuration
- C. Phones need to be restarted
- D. CUCM can't read phone configurations
Answer: B
NEW QUESTION # 53
Refer to the exhibit:
Refer to the exhibit, Which two Cisco UCS PowerTool commands provide this output? (Choose two)
- A. Get-UcsRackSystems | Select-Object Dn
- B. Get-UcsServer | Select-Object Dn
- C. Get-UcsBlade | Select-Object Dn
- D. Get-UcsSystems | Select-Object Dn
- E. Get-UcsRackUnit | Select-Object Dn
Answer: B,C
NEW QUESTION # 54
Refer to the exhibit:
Refer to the exhibit, Which two Cisco UCS PowerTool commands provide this output? (Choose two)
- A. Get-UcsRackUnit | Select-Object Dn
- B. Get-UcsRackSystems | Select-Object Dn
- C. Get-UcsBlade | Select-Object Dn
- D. Get-UcsSystems | Select-Object Dn
- E. Get-UcsServer | Select-Object Dn
Answer: A,C
Explanation:
The output shown in the exhibit is a list of distinguished names (DNs) for Cisco Unified Computing System (UCS) blades within specific chassis. The correct PowerTool commands to provide this output would be those that retrieve information about UCS blade servers and then select their distinguished names. The command Get-UcsBlade | Select-Object Dn retrieves all the UCS blade servers and then pipes them to the Select-Object cmdlet to display only their distinguished names, which matches the pattern seen in the exhibit. Similarly, Get-UcsRackUnit | Select-Object Dn could potentially provide a similar output if rack units are named in a similar fashion to blades within the system's naming conventions. References :=
* Cisco UCS PowerTool Suite - PowerShell Libraries for Cisco UCS Manager: 1
* Cisco UCS Manager CLI Configuration Guide: 2
NEW QUESTION # 55
Drag and drop the code to complete an Ansible playbook that creates a new tenant. Not all options are used.
Answer:
Explanation:
Reference:
https://docs.ansible.com/ansible/latest/scenario_guides/guide_aci.html
NEW QUESTION # 56
Which programming language are the Cisco UCS Director custom workflow tasks written in?
- A. Java
- B. Cloupia Script
- C. Python
- D. C++
Answer: A
Explanation:
Section: Data Center Compute
NEW QUESTION # 57
......
Get The Important Preparation Guide With 300-635 Dumps: https://exams4sure.briandumpsprep.com/300-635-prep-exam-braindumps.html
