D-UN-DY-23 Tested & Approved Proven Professional Study Materials
Validate your Skills with Updated Proven Professional Exam Questions & Answers and Test Engine
EMC D-UN-DY-23 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
EMC D-UN-DY-23 (Dell Unity Deploy 2023) certification exam is a valuable credential for IT professionals who deploy and manage Dell EMC Unity storage systems. Dell Unity Deploy 2023 Exam certification exam measures the knowledge and skills required to install, configure, and manage Dell EMC Unity storage systems in an enterprise environment. Dell Unity Deploy 2023 Exam certification can help IT professionals to advance their careers and increase their earning potential, while also helping organizations to identify qualified candidates who can deploy and manage Dell EMC Unity storage systems.
EMC D-UN-DY-23, also known as the Dell Unity Deploy 2023 exam, is designed for IT professionals who want to validate their knowledge and skills related to the installation, configuration, and management of Dell Unity storage systems. Dell Unity Deploy 2023 Exam certification exam is based on the latest version of Dell Unity Operating Environment, which is an advanced storage platform that enables organizations to store, manage, and protect their data effectively.
NEW QUESTION # 174
Which Unity feature allows for the configuration of the host I/O limits to manage bandwidth and throughput of data?
- A. Quality of Service
- B. User Quotas
- C. Tree Quotas
- D. Performance Monitor
Answer: A
NEW QUESTION # 175
At what point does a host write I/O get written to the compression library?
- A. Immediately after being acknowledge by the host
- B. Immediately after it is written to the data log
- C. After the write is in cache but not yet acknowledged by the host
- D. After the write is in the data log and a PFDC flush operation occurs
Answer: D
NEW QUESTION # 176
What is a connectivity rule for hosts that connect to multiple Unity systems?
- A. iSCSI is required to connect a host to multiple arrays
- B. Can connect to different arrays with different protocols
- C. CNA connections used with alternating protocols
- D. Must connect to all arrays using a single protocol
Answer: B
NEW QUESTION # 177
A deployment engineer has changed the Schedule Time Zone under the Settings menu. However, existing snapshots schedules continue to run at the previously configured time.
Why is this occurring?
- A. Existing snapshot schedules cannot be updated to the same absolute time.
- B. The Unity system time is not set correctly and must be updated under system settings.
- C. Existing snapshot schedules are not updated to the same absolute time when the time zone is changed.
- D. The Unity management server was not restarted before time zone changes took effect.
Answer: C
NEW QUESTION # 178
In UnityVSA, which license(s) is able to extend the storage capacity from 25 TB to 50 TB with an upgrade path license?
- A. Community
- B. WOLS only
- C. Professional only
- D. Professional and WOLS
Answer: C
NEW QUESTION # 179
A system administrator wants to create a pool using a mixture of drive sizes and types within one dynamic storage pool.
Which is a consideration to create the storage pool?
- A. The system supports a combination of disk types and sizes in a RAID Group.
- B. The system supports a combination of disk types and sizes in a drive partnership group.
- C. Dynamic Pools only support a single tier pool.
- D. Dynamic pools only support Flash Drives.
Answer: B
NEW QUESTION # 180
What is a characteristic of Host Groups?
- A. Block storage resources added to a host group are accessible to all the member hosts.
- B. Hosts added to a host group must not have mapped block storage resources.
- C. Access to block storage resources must be set before adding hosts to a host group.
- D. Block storage resources attached to one of the member hosts are accessible to the entire host group.
Answer: A
NEW QUESTION # 181
A user has deployed an OVA template, leaving the System Name and both the IPv4 and IPv6 management settings blank on the Customize Template page.
What can be used from a vSphere Console session to assign a static IPv4 address to the unconfigured UnityVSA management interface?
- A. svc_initial_config command
- B. svc_arrayconfig command
- C. Connection Utility
- D. InitCLI.exe tool
Answer: A
NEW QUESTION # 182
What are characteristics of the LUN Snapshot Copy operation?
- A. Parent cannot be a snapshot copy
Can only copy a detached snapshot
Has an independent Retention Policy from the parent - B. Parent cannot be a snapshot copy
Can copy an attached or detached snapshot
Inherits the parent Snapshot Retention Policy - C. Parent can be a snapshot copy
Can copy an attached or detached snapshot
Inherits the parent Snapshot Retention Policy - D. Parent can be a snapshot copy
Can only copy a detached snapshot
Has an independent Retention Policy from the parent
Answer: C
NEW QUESTION # 183
What functionality is provided to Unity from its integration with CTA?
- A. Data migration solution for VNX block storage to Unity
- B. Unity configured as a destination for tiered DHSM data
- C. DHSM data mobility to cloud destination on Virtustream
- D. Synchronous disaster recovery solution for Unity file storage
Answer: B
NEW QUESTION # 184
In an asynchronous replication, what is the maximum number of replicated NAS servers supported for the Dell Unity XT 380 series?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Explanation
The maximum number of replicated NAS servers supported for the Dell Unity XT 380 series in an asynchronous replication is 126. This is the same as the maximum number of NAS servers supported for the Dell Unity XT 380 series in general. Asynchronous replication is a method of replicating data between two Dell Unity systems with a configurable recovery point objective (RPO). It allows the source system to continue normal operations without waiting for the destination system to acknowledge the completion of the replication.
References: [Dell EMC Unity: Replication Technologies], [Dell EMC Unity: NAS Capabilities]
NEW QUESTION # 185
What describes the LUN Snapshot Copy operation?
- A. Parent cannot be a snapshot copy
Can only copy a detached snapshot
Has an independent Retention Policy from the parent - B. Parent cannot be a snapshot copy
Can copy an attached or detached snapshot
lnherits the parent Snapshot Retention Policy - C. Parent can be a snapshot copy
Can copy an attached or detached snapshot
Inherits the parent Snapshot Retention Policy - D. Parent can be a snapshot copy
Can only copy a detached snapshot
Has an independent Retention Policy from the parent
Answer: C
NEW QUESTION # 186
What is the role of protocol endpoints in Dell Unity XT VMware storage provisioning?
- A. Enable transparent host attach operations to Snapshots of Vol datastores.
- B. Provide a write consistent view to the host when accessing multiple VMware datastores.
- C. Establish a data path between the ESXi host and the respective Vol datastores.
- D. Manage host 10 workload balance between multiple paths to the VMware datastores.
Answer: C
NEW QUESTION # 187
What should be done prior to a Unity software upgrade to ensure that no underlying problems exist that may prevent a successful upgrade?
- A. Perform a Health Check
- B. Check for FCOs
- C. Check for ETAs
- D. Enable Service mode
Answer: A
NEW QUESTION # 188
Writes are redirected on the parent pool.
A company needs to expand their dynamic pool by 5 TB. The current dynamic pool consists of 63 3.8 TB SSDs that are configured for RAID 5 (4+1).
What is the minimum number of drives needed for the pool expansion?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 189
What component is a hot-pluggable CRU?
- A. 25 drive DPE cooling module
- B. DPE I/O module
- C. DPE BBU
- D. 80 drive DAE cooling module
Answer: B
NEW QUESTION # 190
Which resource can generate a replacement procedure for Unity CPUs?
- A. SolVe Desktop for Unity
- B. Dell EMC Online Support
- C. Procedure Generator
- D. Unity Into Hub
Answer: C
NEW QUESTION # 191
Assuming that no snapshots currently exist for the Base LUN, what is the maximum number of Thin Clones for the Base LUN?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 192
What types of file retention are available with the Dell EMC Unity XT family arrays?
- A. Enterprise and Compliance
- B. Community and Professional editions
- C. Professional and Enterprise editions
- D. Integrated and Centralized
Answer: A
NEW QUESTION # 193
What is the correct sequence of steps to create a replication session on an existing LUN?
- A. Choose the destination.
Start the Configure Replication wizard.
Select the Replication tab from the LUN Properties page.
Choose the replication mode. - B. Start the Configure Replication wizard.
Choose the replication mode.
Select the Replication tab from the LUN Properties page.
Choose the destination. - C. Select the Replication tab from the LUN Properties page.
Start the Configure Replication wizard.
Choose the destination.
Choose the replication mode. - D. Start the Configure Replication wizard.
Choose the destination.
Choose the replication mode.
Select the Replication tab from the LUN Properties page.
Answer: C
NEW QUESTION # 194
What is a characteristic of FAST VP?
- A. FAST VP optimizes data placement by moving 1 GB slices between disk tiers.
- B. Users can enable or disable FAST. VP at the LUN level.
- C. FAST VP data relocation runs in the background at all times once it is enabled.
- D. Users can set the FAST VP data relocation rate.
Answer: D
NEW QUESTION # 195
What functionality is provided by the Unity UFS64 Enterprise File System architecture?
- A. QoS controlled by density-based policies
- B. Space reclamation of unused blocks
- C. File systems scaled up to 16 TB
- D. Up to 64,000 sub-directories per directory
Answer: B
NEW QUESTION # 196
A system administrator wants to grant privileges to manage storage resources and host configurations for some users. However, the administrator wants to ensure users have no privileges to manage user accounts, change network settings and NAS servers, or perform software upgrades.
Which user role should be associated with the user accounts to be created?
- A. Service
- B. Storage Administrator
- C. Operator
- D. Administrator
Answer: B
NEW QUESTION # 197
A storage administrator is creating a host profile in Unisphere to provide host access to block storage resources using the iSCSI protocol. The host initiators were not automatically discovered and must be manually added.
In addition to the SAN host IQN, what other configuration can be performed through the "Create iSCSI Initiator Wizard" window?
- A. Create Mutual CHAP secret
- B. Create Global CHAP secret
- C. Enable and disable CHAP settings
- D. Enter CHAP username and secret
Answer: D
NEW QUESTION # 198
An administrator notices that the communications between Unisphere and the storage system get interrupted.
Which service task should the administrator perform to fix the issue with minimal impact?
- A. Restart Management Software
- B. Reboot Storage Processor
- C. Reinitialize
C Enable SSH
Answer: A
Explanation:
Explanation
The service task that the administrator should perform to fix the issue with minimal impact is Restart Management Software. This service task restarts the management software on both storage processors without affecting the data services or the host I/O. This can resolve the communication issues between Unisphere and the storage system. Reinitialize, Enable SSH, and Reboot Storage Processor are service tasks that have more impact and risk than Restart Management Software.
References: [Dell EMC Unity: Unisphere Overview], [Dell EMC Unity: Service Tasks]
NEW QUESTION # 199
......
D-UN-DY-23 [Jan-2025] Newly Released] D-UN-DY-23 Exam Questions For You To Pass: https://exams4sure.briandumpsprep.com/D-UN-DY-23-prep-exam-braindumps.html
