CDCS-001 Dumps PDF 2023 Strategy Your Preparation Efficiently [Q14-Q39]

Share

CDCS-001 Dumps PDF 2023 Strategy Your Preparation Efficiently

Latest Verified & Correct GAQM CDCS-001 Questions

NEW QUESTION 14
Which one of the following measures the real power drawn by the load equipment?

  • A. Amps
  • B. Volts
  • C. Watts
  • D. Amperes

Answer: C

Explanation:
Explanation
Watts measures the real power drawn by the load equipment and is determined by multiplying the volts and amps of the load

 

NEW QUESTION 15
True or False: Human error is a major cause of data center downtime

  • A. False
  • B. True

Answer: B

Explanation:
Explanation
Human error is a major cause of data center downtime. Human mistakes are one of the top causes of data center outages, accounting for around one-third of all downtime incidents. Common causes of human error in data centers include misconfiguration, inadequate maintenance, and improper security practices. To reduce the risk of human error, it is important to ensure that data center staff receive proper training, have adequate access control measures in place, and are familiar with best practices for data center operations.

 

NEW QUESTION 16
Which one of the following describes the amount of resistance electricity encounters?

  • A. Watts
  • B. Ampere
  • C. Ohm
  • D. Volts

Answer: C

Explanation:
Explanation
Ohm () describes the amount of resistance electricity encounters. It is one of the base units of the International System of Units (SI), and is defined as the amount of resistance that a conductor has when a force of one volt is applied across it. Ohms are used to measure the electrical resistance of a circuit, and can be used to determine the power of a circuit or the amount of current flowing through it.

 

NEW QUESTION 17
Which one of the following is a Physical Security Device?

  • A. Fiber optic cable
  • B. Token card
  • C. Access Key
  • D. Contactless smart card

Answer: D

Explanation:
Explanation
A contactless smart card is a physical security device that uses radio frequency identification (RFID) technology to identify and authenticate an individual. This type of card is used in a variety of applications, such as access control systems and digital payment systems. It is also used in physical access control systems, where the card is used to unlock doors or grant access to restricted areas. Contactless smart cards are also used in building access systems, where the card is used to grant access to certain areas of the building.

 

NEW QUESTION 18
What are the two main applications for ac (alternate current)?

  • A. static, dynamic
  • B. power, information
  • C. direct, pulsating
  • D. electric, magnetic

Answer: B

Explanation:
Explanation
The two main applications for AC (alternate current) are power and information. AC is used to generate and transfer power to electrical devices, and is also used to carry information signals in telecommunications.

 

NEW QUESTION 19
Which one of the following controls the voltage produced at the output of the alternator?

  • A. Voltage Stabilizer
  • B. Voltage Backup Device
  • C. Voltage Regulator
  • D. Voltage Meter

Answer: C

Explanation:
Explanation
A voltage regulator controls the voltage produced at the output of the alternator. It's a device that maintains the output voltage of an alternating current (AC) power source within a safe range. The voltage regulator compares the actual output voltage to the desired voltage level and adjusts the voltage accordingly.
Voltage Meter, Voltage Stabilizer, and Voltage Backup Device are not devices that control the voltage produced at the output of the alternator. They are different types of equipment and have different functions.
A voltage meter is a device used to measure the voltage in an electrical circuit. A voltage stabilizer is an electronic device that maintains a constant voltage level. A voltage backup device is a device that provides temporary backup power in case of an electrical outage.

 

NEW QUESTION 20
Every air distribution system has a ____________ system and a _________ system

  • A. Maintenance, Regulation
  • B. Supply, Reverse
  • C. Supply, Release
  • D. Supply, Return

Answer: D

Explanation:
Explanation
Every air distribution system has a supply system, which delivers conditioned air to the space, and a return system, which collects the air from the space and returns it to the air handling unit. The return system is responsible for providing the necessary negative pressure in the space to ensure proper air circulation.

 

NEW QUESTION 21
Which type of power can be a source available to the data center that takes over the function of supplying when utility power is unavailable?

  • A. Active
  • B. Alternate
  • C. Standby
  • D. Passive

Answer: C

Explanation:
Explanation
Standby power, also known as backup power, is a type of power that can be a source available to the data center that takes over the function of supplying when utility power is unavailable. Standby power systems are designed to provide power to critical loads in the event of a power outage, and can include generators, uninterruptible power supplies (UPS), and batteries. Standby power systems can be used to provide power to the data center for a short period of time, such as a few hours or days, until utility power is restored.
Passive, Active and Alternate are not specific type of power sources used in data center. They are terms used in different context and have different meaning.

 

NEW QUESTION 22
If a waveform period is determined to be 10 microseconds in duration, what is the frequency of the signal?

  • A. 10 kHz
  • B. 100 kHz
  • C. 100 Hz
  • D. 1000 Hz

Answer: B

Explanation:
Explanation
Frequency is the inverse of period, so to calculate the frequency of a signal with a period of 10 microseconds, you would divide 1 by the period, which is equal to 100 kHz.

 

NEW QUESTION 23
A typical data center load would consist of _____ (Choose 3)

  • A. Software
  • B. Networking equipment
  • C. Cooling equipment
  • D. Power generator
  • E. Computers

Answer: C,D,E

 

NEW QUESTION 24
______________ security means keeping unauthorized or ill-intentioned people out of places that they do not belong.

  • A. Physical
  • B. Topological
  • C. Logical
  • D. Network

Answer: A

Explanation:
Explanation
Physical security means keeping unauthorized or ill-intentioned people out of places that they do not belong.
This can involve a variety of measures, such as locks, alarms, access control systems, cameras, and guards.
Physical security is an important part of any security system, as it helps to protect valuable assets and personnel from theft, vandalism, and other malicious activities.

 

NEW QUESTION 25
____________ is a systematic variation of the voltage wave form or a series of random voltage changes of small dimensions.

  • A. Voltage truncation
  • B. Voltage fluctuation
  • C. Standby variation
  • D. Frequency variation

Answer: B

Explanation:
Explanation
Voltage fluctuation is a systematic variation of the voltage waveform or a series of random voltage changes of small dimensions that occur over a period of time. Voltage fluctuation can be caused by a variety of factors, such as changes in demand, changes in the power system, faults on the power system, or the switching of large loads.

 

NEW QUESTION 26
Data Center Precision Cooling Systems maintain temperature within _____________ degree(s) of their design set point.

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: A

 

NEW QUESTION 27
Which power distribution component is often used when many electrical devices are enclosed proximity especially with audio, video and computers?

  • A. Server plug
  • B. Backup server
  • C. Outlet strips
  • D. Power distribution units (PDU)

Answer: D

Explanation:
Explanation
The best option for enclosing many electrical devices in proximity, especially with audio, video and computers, is Power Distribution Units (PDUs). PDUs are designed to provide power to multiple devices using a single power source, such as a wall outlet or a generator, while providing protection against power surges.
PDUs are generally equipped with multiple outlets to allow for a variety of electrical devices to be connected and powered simultaneously.

 

NEW QUESTION 28
___________ measures the amount of electrical current flowing through a circuit during a specific time interval.

  • A. Watts
  • B. Volts
  • C. Ampere
  • D. Ohm

Answer: C

Explanation:
Explanation
An ampere (A) is the unit of measurement for electric current. It measures the amount of electrical current flowing through a circuit during a specific time interval. The ampere is named after Andre-Marie Ampere, a French mathematician and physicist who was one of the main discoverers of electromagnetism.
Ohm () is the unit of measurement for electric resistance, which is the opposition to the flow of an electric current through a circuit.
Volt (V) is the unit of measurement for electric potential difference, which is the energy required per unit charge to move a test charge between two places in a static electric field.
Watt (W) is the unit of measurement for power, which is the rate at which energy is used or generated in an electrical circuit.
References:
* "Current" (https://www.britannica.com/topic/current-electricity)
* "Electric current" (https://www.sciencedirect.com/topics/engineering/electric-current)
* "Units of Measurement"
(https://www.allaboutcircuits.com/textbook/direct-current/chpt-1/units-of-measurement/)

 

NEW QUESTION 29
What are the two main applications for ac (alternate current)?

  • A. static, dynamic
  • B. power, information
  • C. direct, pulsating
  • D. electric, magnetic

Answer: B

Explanation:
Explanation
The two main applications for AC (alternate current) are power and information. AC is used to generate and transfer power to electrical devices, and is also used to carry information signals in telecommunications.

 

NEW QUESTION 30
Which mounted system is used to cool small IT environments?

  • A. Floor Mounted System
  • B. Ceiling Mounted System
  • C. Air Mounted System
  • D. Chilled Mounted System

Answer: C

Explanation:
Explanation
An air mounted system is often used to cool small IT environments. This type of cooling system is typically mounted on the wall or ceiling and works by blowing cool air into the room to lower the temperature. Air mounted systems are compact, easy to install and maintain, and can be a cost-effective solution for small spaces.

 

NEW QUESTION 31
......

CDCS-001 PDF Dumps Are Helpful To produce Your Dreams Correct QA's: https://exams4sure.briandumpsprep.com/CDCS-001-prep-exam-braindumps.html