[Apr-2023] 350-401 Exam Dumps Pass with Updated 2023 Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)
Free 350-401 Exam Dumps to Pass Exam Easily
What is the Exam Cost of Cisco 350-401 Exam
The exam cost of Cisco 350-401 Exam is $400 USD
Tips for the preparation for the exam:
Develop a study plan that is suited to your time and schedule, and you will be able to pass the test in your first attempt. You can also study with your study partner or friend. You both friends can learn more, by avoiding distraction and by sharing knowledge. Simulations will also help you in understanding the subject and concepts. Architecting Cisco IP Service Provider Networks (IPSPN) Cisco 350-401 Exam covers almost all the topics that will be in the exam. Verified Cisco Managing Industrial Networks with Cisco Networking Technologies (IMINS) 350-401 exam dumps will help you clear the Managing Industrial Networks with Cisco Networking Technologies (IMINS) 350-401 test in your first attempt. Ensure your success in the Managing Industrial Networks with Cisco Networking Technologies (IMINS) Cisco 350-401 Exam.
Introduced 350-401 exam questions resources for candidates to score high in the Cisco 350-401 Exam. Pass Exam successfully by preparing from the Leading Provider of Preparation Materials, your best choice for 350-401 exam certification. Redundancy questions and answers for the Cisco 350-401 Exam. Cisco 350-401 Dumps enables you to pass Cisco 350-401 Exam certification. All the questions and accurate answers are supported by Cisco experts. Instant understanding of Managing Industrial Networks with Cisco Networking Technologies (IMINS) Cisco 350-401 Exam. Make your preparation for the exam swift and easy by using the CertTutor study material. It is quite time-consuming and difficult to get certified and prepared for 350-401 exam. Comments and reviews like these will help you to score high in the exam.
Testing is a thorough review of all the material you have learned in class. If you have been studying for weeks or months, preparation time can add up to a full week just for review. Rating yourself is not an effective way to determine how prepared you are for the exam.
Infrastructure: This domain focuses on infrastructure and its associated concepts. The areas of its focus include the following:
- Layer 3 concepts, which covers comparing routing concepts of OSPF and EIGRP; configuring and authenticating OSPF environments, and eBGP between closely connected neighbors;
- IP Services, covering NTP, NAT/PAT, first-hop redundancy protocols, and multicast protocols.
- Wireless concepts, covering knowledge of Layer 1 concepts, AP modes, and antenna categories, as well as access point discovery, principles, use case for Layer 2 and 3 roaming, WLAN configuration, and wireless client connectivity concerns;
- Layer 2 concepts, which requires troubleshooting dynamic and static 802.1q trunking protocols as well as static and dynamic EtherChannels. It also covers skills in configuring and verifying common Spanning Tree Protocols (MST and RSTP);
NEW QUESTION 252
What is difference between TCAM and the MAC address table?
- A. TCAM is used to make Lalyer 2 forwarding decisions CAM is used to build routing tables.
- B. Router prefix lookups happens in CAM.MAC address table lookups happen in TCAM.
- C. The MAC address table supports partial matches .TCAM requires an exact match.
- D. The MAC address table is contained in CAM.ACL and QoS information is stored in TCAM.
Answer: B
NEW QUESTION 253
Drag and drop the characteristics from the left onto the correct infrastructure deployment types on the right.
Answer:
Explanation:
NEW QUESTION 254
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
- A. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques.
- B. Type 1 hypervisor enables other operating systems to run on it.
- C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
- D. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS.
Answer: D
Explanation:
Explanation
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server. Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures. Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. answer 'Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS' big advantage of Type 2 hypervisors is that management console software is not required. Examples of type 2 hypervisor are VMware Workstation (which can run on Windows, Mac and Linux) or Microsoft Virtual PC (only runs on Windows).
NEW QUESTION 255
Drag and drop the characteristics from the left onto the deployment types on the right.
Answer:
Explanation:
NEW QUESTION 256
Refer to the exhibit.
An engineer must create a configuration that executes the show run command and then terminates the session when user CCNP legs in. Which configuration change is required''
- A. Add the access-class keyword to the aaa authentication command
- B. Add the autocommand keyword to the username command
- C. Add the access-class keyword to the username command
- D. Add the autocommand keyword to the aaa authentication command
Answer: B
NEW QUESTION 257
Drag and drop the characteristics from the left onto the protocols they apply to on the right?
Answer:
Explanation:
Explanation
Diagram Description automatically generated
NEW QUESTION 258
Refer to exhibit.
VLANs 50 and 60 exist on the trunk links between all switches All access ports on SW3 are configured for VLAN 50 and SW1 is the VTP server Which command ensures that SW3 receives frames only from VLAN
50?
- A. SW1 (config)#vtp pruning
- B. SW2(config)=vtp pruning
- C. SW3(config)#vtp mode transparent
- D. SW1 (config >>vtp mode transparent
Answer: A
NEW QUESTION 259
A client device fails to see the enterprise SSID, but other client devices are connected to it.
What is the cause of this issue?
- A. The client has incorrect credentials stored for the configured broadcast SSID.
- B. The broadcast SSID was not manually configured on the client.
- C. The hidden SSID was not manually configured on the client.
- D. The client has incorrect credentials stored for the configured hidden SSID.
Answer: C
NEW QUESTION 260 
Refer to the exhibit. External users require HTTP connectivity to an internal company web server that is listening on TCP port 8080. Which command set accomplishes this requirement?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION 261 
Refer to the exhibit. R1 is able to ping the R3 fa0/1 interface. Why do the extended pings fail?
- A. R2 and R3 do not have an OSPF adjacency
- B. The DF bit has been set
- C. R3 is missing a return route to 10.99.69.0/30
- D. The maximum packet size accepted by the command is 1476 bytes.
Answer: B
NEW QUESTION 262
Drag and drop the characteristics from the left onto the deployment models on the right.
Answer:
Explanation:
Explanation
A picture containing graphical user interface Description automatically generated
NEW QUESTION 263
Refer to the exhibit.
These commands have been added to the configuration of a switch. Which command flags an error If It is added to this configuration?
- A. monitor session 1 source interface port-channel 6
- B. monitor session 1 source interface port-channel 7, port-channel 8
- C. monitor session 1 source interface FastEthernet0/1 rx
- D. monitor session 1 source vlan 10
Answer: D
Explanation:
NEW QUESTION 264
Which three resources must the hypervisor make available to the virtual machines? (Choose three)
- A. IP address
- B. storage
- C. bandwidth
- D. secure access
- E. processor
- F. memory
Answer: B,C,F
NEW QUESTION 265
Which statement describes the IP and MAC allocation requirements for virtual machines on types 1 hypervisors?
- A. Each virtual machines requires a unique IP address but shares the MAC address with the address of the physical server.
- B. Each virtual machine requires a unique IP address but shares the MAC address with the physical server
- C. Each virtual machine requires a unique IP and MAC addresses to be able to reach to other nodes.
- D. Each virtual machine requires a unique MAC address but shares the IP address with the physical server.
Answer: C
Explanation:
Explanation
A virtual machine (VM) is a software emulation of a physical server with an operating system.
From an application's point of view, the VM provides the look
and feel of a real physical server, including all its components, such as CPU, memory, and network interface cards (NICs).
The virtualization software that creates VMs and performs the hardware abstraction that allows multiple VMs to run concurrently is known as a hypervisor.
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server. Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures. Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. answer 'Each virtual machine requires a unique IP and MAC addresses to be able to reach to other nodes' big advantage of Type 2 hypervisors is that management console software is not required. Examples of type 2 hypervisor are VMware Workstation (which can run on Windows, Mac and Linux) or Microsoft Virtual PC (only runs on Windows).
NEW QUESTION 266
An engineer is working with the Cisco DNA Center API Drag and drop the methods from the left onto the actions that they are used for on the right.
Answer:
Explanation:
NEW QUESTION 267
Refer to the exhibit.
Assuming that R is a CE router, which VRF is assigned to Gi0/0 on R1?
- A. Management VRF
- B. Default VRF
- C. VRF VPN_B
- D. VRF VPN_A
Answer: B
Explanation:
Explanation
There is nothing special with the configuration of Gi0/0 on R1. Only Gi0/0 interface on R2 is assigned to VRF VPN_A. The default VRF here is similar to the global routing table concept in Cisco IOS
NEW QUESTION 268
Refer the exhibit.
Which router is the designated router on the segment 192.168.0.0/24?
- A. This segment has no designated router because it is a p2p network type.
- B. Router NewYork because it has a higher router ID
- C. Router Chicago because it has a lower router ID
- D. This segment has no designated router because it is a nonbroadcast network type.
Answer: A
NEW QUESTION 269
Refer to the exhibit.
Which password allows access to line con 0 for a username of "tommy" under normal operation?
- A. Tommy
- B. local
- C. Cisco
- D. 0 Cisco
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/security-vpn/terminal-access-controller-access-control-system-tacac In this question, there are two different passwords for user "tommy": + In the TACACS+ server, the password is "Tommy" + In the local database of the router, the password is "Cisco".
From the line "login authentication local" we know that the router uses the local database for authentication so the password should be "Cisco".
Note: "... password 0 ..." here means unencrypted password.
NEW QUESTION 270
What is the result of applying this access control list?
- A. TCP traffic with the URG bit set is allowed
- B. TCP traffic with the DF bit set is allowed
- C. TCP traffic with the SYN bit set is allowed
- D. TCP traffic with the ACK bit set is allowed
Answer: D
Explanation:
Explanation
The established keyword is only applicable to TCP access list entries to match TCP segments that have the ACK and/or RST control bit set (regardless of the source and destination ports), which assumes that a TCP connection has already been established in one direction only. Let's see an example below:
Suppose you only want to allow the hosts inside your company to telnet to an outside server but not vice versa, you can simply use an "established" access-list like this: access-list 100 permit tcp any any established access-list 101 permit tcp any any eq telnet ! interface S0/0 ip access-group 100 in ip access-group 101 out
NEW QUESTION 271
Refer to the exhibit.
What are two effect of this configuration? (Choose two.)
- A. The 10.1.1.0/27 subnet is assigned as the inside global address range.
- B. Inside source addresses are translated to the 209.165.201.0/27 subnet.
- C. It establishes a one-to-one NAT translation.
- D. The 209.165.201.0/27 subnet is assigned as the outside local address range.
- E. The 10.1.1.0/27 subnet is assigned as the inside local addresses.
Answer: B,E
NEW QUESTION 272
Drag and Drop the decryptions from the left onto the routing protocol they describe on the right.
Answer:
Explanation:
Explanation
NEW QUESTION 273
Refer to the exhibit.
The traceroute fails from R1 to R3. What is the cause of the failure?
- A. An ACL applied Inbound on loopback0 of R2 Is dropping the traffic.
- B. Redistribution of connected routes into OSPF is not configured.
- C. The loopback on R3 Is in a shutdown stale.
- D. An ACL applied Inbound on fa0/1 of R3 is dropping the traffic.
Answer: D
Explanation:
Reference:
We see in the traceroute result the packet could reach 10.99.69.5 (on R2) but it could not go any further so we can deduce an ACL on R3 was blocking it.
Note: Record option displays the address(es) of the hops (up to nine) the packet goes through.
NEW QUESTION 274
......
350-401 Exam Dumps, 350-401 Practice Test Questions: https://exams4sure.briandumpsprep.com/350-401-prep-exam-braindumps.html
