Particularly high passing rate

Please believe that our company is very professional in the research field of the GB0-371-ENU training questions, which can be illustrated by the high passing rate of the examination. Despite being excellent in other areas, we have always believed that quality and efficiency should be the first of our GB0-371-ENU real exam. For study materials, the passing rate is the best test for quality and efficiency. There may be some other study materials with higher profile and lower price than our products, but we can assure you that the passing rate of our GB0-371-ENU learning materials is much higher than theirs. And this is the most important. According to previous data, 98 % to 99 % of the people who use our GB0-371-ENU training questions passed the exam successfully. If you are willing to give us a trust, we will give you a success.

Intimate after-sale service

There may be customers who are concerned about the installation or use of our GB0-371-ENU training questions. You don't have to worry about this. In addition to high quality and high efficiency, considerate service is also a big advantage of our company. We will provide 24 - hour online after-sales service to every customer. If you have any questions about installing or using our GB0-371-ENU real exam, our professional after-sales service staff will provide you with warm remote service. As long as it is about our GB0-371-ENU learning materials, we will be able to solve. Whether you're emailing or contacting us online, we'll help you solve the problem as quickly as possible. You don't need any worries at all.

Saving as much time as possible

As we all know, the preparation process for an exam is very laborious and time- consuming. We had to spare time to do other things to prepare for GB0-371-ENU exam, which delayed a lot of important things. If you happen to be facing this problem, you should choose our GB0-371-ENU real exam. With our study materials, only should you take about 20 - 30 hours to preparation can you attend the exam. The rest of the time you can do anything you want to do to,which can fully reduce your review pressure. Saving time and improving efficiency is the consistent purpose of our GB0-371-ENU learning materials. With the help of it, your review process will no longer be full of pressure and anxiety.

It is well known that even the best people fail sometimes, not to mention the ordinary people. In face of the GB0-371-ENU exam, everyone stands on the same starting line, and those who are not excellent enough must do more. Every year there are a large number of people who can't pass smoothly. If you happen to be one of them, our GB0-371-ENU learning materials will greatly reduce your burden and improve your possibility of passing the exam. Our advantages of time-saving and efficient can make you no longer be afraid of the GB0-371-ENU exam, and I'll tell you more about its benefits next.

DOWNLOAD DEMO

H3C GB0-371-ENU Exam Syllabus Topics:

H3C Constructing H3C High-Performance Campus Networks Sample Questions:

Question 1

Before configuring Layer 3 multicast, the first configuration that needs to be done is

A. Configure PIM protocol
B. Enter IGMP view
C. Enable multicast globally through the multicastrouting-enable command
D. SB sets the IGMpi protocol version

Question 2

Which of the following aspects should be considered for the security of the campus network?

A. Effectively identify legal and illegal users
B. Protect the physical circuit
C. Effective access control
D. Effective management of network equipment and network topology

Question 3

In the switching network as shown in the figure, all three switches only have the default VLAN1, the interconnection ports of the three switches are trunks, and all VLANs are allowed to pass, and the three switches have the global and port GVRP functions enabled. VLAN 10 is created on the switch SWA, VLAN 20 is created on the SWC, and the GVRP registration mode of the Ethemet1/0/1 port is set to Fixed on the switch SWA, and the status information of each Trunk port is checked on the three switches. The correct one is displayed below (Choose one or more)

A. [SWB]display interface Ethernet 1/0/2 Ethernetl/0/2 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), 10, 20 VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q
B. [SWC]display interface Ethernet 1/0/1 Ethernetl/0/1 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), 10, 20 VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q
C. [SWA]display interface Ethernet 1/0/1 Ethernet1/0/1 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), 10, 20 VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q
D. [SWB]display interface Ethernet 1/0/1 Ethernetl/0/1 current state: UP ...... PVID: 1 Mdi type: auto Link delay is 0(sec) Port link-type: trunk VLAN passing: 1 (default vlan), 10, 20 VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q

Question 4

After executing the display interface Ethernet 1/0/1 command on the switch SWA, the output information is as follows:
[SWA]display interface Ethernet 1/0/1
Ethernet1/0/1 current state: UP
PVID: 10
Mdi type: auto
Link delay is 0(sec)
Port link-type: trunk
VLAN passing: 1 (default vlan), 10
VLAN permitted: 1 (default vlan), 2-4094
Trunk port encapsulation: IEEE 802.1q
Port priority: 0
It can be judged from the above output

A. Port Ethernet1/0 is a Trunk port, which only allows data frames of VLAN 10 to pass through
B. Data frames with VLAN10 tags will not be stripped off when Ethernet1/0/1
C. Data frames with VLAN1 tags will not be discarded when they enter Ethernet1/0/1
D. Data frames without VLAN tags will be tagged with VLAN10 when they enter the port Ethernet1/0/1

Question 5

The three routers RTA, RTB, and RTC are connected together via a LAN to form a VRRP backup group. The interface configuration of each router is as follows:
RTA's GigabitEthernet ip address 192.168.0.252 255.255.255.0 vrrp vrid 1 virtual-ip 192.168.0.254 vrrp vrid 1 priority 120 RTB's GigabitEthernet ip address 192.168.0.253 255.255.255.0 vrrp vrid 1 virtual-ip 192.168.0.254 vrrp vrid 1 priority 90 RTC's GigabitEthernet ip address 192.168.0.254 255.255.255.0 vrrp vrid 1 virtual-ip 192.168.0.254
It can be known from the above information

A. After RTA is sent, RTB is the master router of the backup group
B. RTA is the master router of the backup group
C. RTB is the master router of the backup group
D. RTC is the master router of the backup group

Solutions: